# Esports Monitor Guide: DyAc 2 vs OLED & Motion Blur | FPS Chaser

Canonical: https://fpschaser.com/gaming-monitor-motion-clarity-guide/

> Compare 240Hz, 360Hz, 480Hz and 540Hz esports monitors. Fast IPS vs QD-OLED vs Fast TN, strobe backlight tech (DyAc 2 / ULMB 2), and pixel overdrive tuning.

Competitive Display Science & Motion Clarity

# GAMING MONITOR & MOTION CLARITY LAB

High FPS is useless if your monitor smears the frames across a slow pixel transition window. Mastering refresh rate saturation, backlight strobing (DyAc 2 / ULMB 2), GtG vs MPRT, and the G-Sync zero-queue formula.

⚡ Motion Clarity Simulator[🛸 UFO Refresh Verification →](https://fpschaser.com/refresh-rate-test/)[👻 Ghosting & MPRT Test →](https://fpschaser.com/ghosting-test/)[🎛️ Color Calibration →](https://fpschaser.com/monitor-calibration/)[🔍 Dead Pixel Check →](https://fpschaser.com/dead-pixel-test/)🔬 Panel Tech Shootout🎯 G-Sync & Reflex Latency Rules[⚡ G-Sync Cap Calc →](https://fpschaser.com/gsync-fps-cap-calculator/)🏆 2026 Competitive Tier List💻 Monitor-to-Rig Pairing

Interactive Optical Diagnostic

## Motion Blur & Frame Persistence Simulator

Simulated Tracking Speed: **1000 px/sec**

Human eyes track moving objects across a display in a continuous sweep, but displays update in discrete hold times (sample-and-hold blur). Adjust the refresh rate and strobing technology below to observe how frame persistence shrinks eye tracking blur.

1. Select Native Refresh Rate:

2. Backlight Strobe / Panel Mode:

3. Tracking Velocity:
1000 px/s

Walking (400) Running (1000) 180° Flick (2000)

Visual Eyeball Tracking Preview (Simulated In-Motion Target) Effective Clarity: 240Hz equivalent

ENEMY 🎯

4.2px trail

Frame Interval Hold
4.17 ms

Time between new frames

Motion Clarity Gain
4x vs 60Hz

Eye tracking blur reduction

Strobe Technology
Sample & Hold

Hold-type blur active

Target Rig FPS Requirement
240+ FPS

To prevent duplicate frames

UFO Frame Pacing & Refresh Rate Verification Lab

## Refresh Rate Verification Tool

Displays moving UFO spacecraft rendered at different frame pacing rates. Use pursuit eye tracking to visually verify if your monitor's physical refresh rate matches your Windows / GPU driver settings.

Measured Display Rate
60 Hz

Frame Time
16.67 ms

V-Sync Jitter
±0.1 ms

**60Hz Bottleneck Detected! OS Refresh Rate Mismatch Likely**
Your browser display loop is running at ~60 Hz. If you purchased a 144Hz, 240Hz, or 360Hz monitor, Windows Display Settings or your GPU driver is almost certainly still locked at the 60Hz default.

UFO Velocity:

Smoothly track the UFOs with your eyes from left to right

01

#### Track The Top UFO (Native Rate)

Keep your head still and smoothly track the top UFO spacecraft with your eyes as it sweeps horizontally. If your monitor is truly running at 144Hz, 240Hz, or 360Hz, the alien pilot, cockpit reflections, and underbelly lights will look**single and sharp** with no phantom duplicate spacecraft.

02

#### Compare Against Lower Lanes

Now glance at the **Half-Rate** and **60 FPS** lanes while tracking. You will notice multiple phantom silhouettes (judder steps) spaced apart. The lower the refresh rate, the wider the spatial gap between duplicate images.

03

#### The 60Hz Bottleneck Diagnosis

If the **top UFO looks identical** to the 60 FPS lane (stuttery with multiple phantom images), your display is bottlenecked at 60Hz in Windows or your browser has disabled hardware acceleration.

Visual Verification Verdict

#### Does your visual inspection match what your monitor is rated for?

Optical Frame Persistence 60Hz vs 144Hz vs 240Hz Fluidity Lab

## Refresh Rate & Fluid Motion Visualizer

Toggle between **60Hz**, **144Hz**, and **240Hz** in real-time or view them synchronized side-by-side. Observe how higher frame rates dramatically shrink the spatial jump between discrete frame steps.

Switch Active Refresh Rate Presets: Clicking a preset instantly swaps the canvas sample cadence

Velocity: 850 px/sec

300 (Tracking) 850 (Strafe) 1800 (Flick)

Target Type:

Playback Rate: 1.0x (Realtime)

Slow-mo magnifies the discrete step jumps

Display Options:

Track the target continuously across the screen

Step Displacement: ~5.9 px per update

Frame Hold: 6.94 ms

60Hz Quantization 16.7ms Hold

At 1000 px/sec, your screen only updates every **16.7 pixels**. Because your retinas track moving targets in a smooth continuous vector, this wide step interval produces phantom duplicate edges and severe sample-and-hold blur.

144Hz Density 6.9ms Hold

Updates every **6.9 pixels** at 1000 px/sec. The spatial gap between frame positions shrinks by **58%**, allowing opponent character models to appear significantly sharper while strafing or peeking angles.

240Hz Fluidity 4.2ms Hold

Updates every **4.2 pixels** at 1000 px/sec. Frame stepping becomes virtually imperceptible to the human eye, enabling instantaneous tracking acquisition and micro-aim corrections during high-speed flick shots.

## Panel Technology Shootout: Fast TN vs Fast IPS vs OLED

Marketing teams love to slap "1ms response time" on boxes. In reality, panel technologies handle liquid crystal transitions and pixel response in vastly different ways. Here is the unvarnished engineering truth for competitive shooters:

Fast TN (DyAc 2) 0.5ms - 1.0ms native

### Industry Benchmark (CRT Grade)

**Best Strobe Implementation:** BenQ ZOWIE DyAc 2 (Dual Backlight Strobing)

**Color & Contrast:** Basic (TN)

**Competitive Superpower:**
Hardcore CS2, Valorant, and Apex Legends pros where eye tracking clarity during recoil control is everything.

**Trade-off / Downside:**
Narrow viewing angles and washed-out gamma curves compared to IPS/OLED. Unsuitable for color grading or cinematic viewing.

Fast IPS 1.0ms - 2.5ms real-world

### Great

**Best Strobe Implementation:** NVIDIA ULMB 2 (G-Sync Pulsar) / ViewSonic PureXP

**Color & Contrast:** Excellent (100% sRGB / DCI-P3)

**Competitive Superpower:**
All-round competitive players who also consume media, edit videos, and play rich single-player RPGs.

**Trade-off / Downside:**
IPS glow in dark rooms, low native contrast ratio (~1000:1), and slight pixel overshoot when aggressive overdrive is forced.

WOLED 0.03ms (Instantaneous transition)

### Near-Perfect

**Best Strobe Implementation:** High Native Refresh (480Hz) or BFI

**Color & Contrast:** Supreme (True Infinite Contrast)

**Competitive Superpower:**
Players demanding instant click-to-pixel transitions, zero backlight bleed, and inky true black levels.

**Trade-off / Downside:**
Risk of burn-in if displaying static HUD elements for thousands of hours; Auto Static Brightness Limiter (ASBL) can dim white screens.

QD-OLED 0.03ms (Sub-millisecond)

### Near-Perfect

**Best Strobe Implementation:** High Native Refresh (240Hz-360Hz)

**Color & Contrast:** Supreme (True Infinite Contrast)

**Competitive Superpower:**
Enthusiasts playing both 4K cinematic titles and high-refresh competitive shooters with maximum HDR color volume.

**Trade-off / Downside:**
Ambient light can cause blacks to appear slightly purplish if room has direct sunlight; sub-pixel triangular layout can cause text fringing.

The Input Delay Bible

## The G-Sync, Reflex & Frame Pacing Golden Rule

01

### NVIDIA Control Panel Settings

- **G-Sync:** ENABLED (Full Screen)
- **Vertical Sync:** ON (in NVCP only)
- **Low Latency Mode:** Ultra or On

Forces the driver to buffer zero back-buffer frames, avoiding micro-stutter queues completely.

02

### In-Game Engine Configuration

- **V-Sync:** ALWAYS OFF in-game
- **NVIDIA Reflex:** Enabled + Boost
- **Frame Rate Limiter:** Uncapped (Reflex auto-caps)

Reflex automatically clamps frame output ~3–4% below your monitor's maximum refresh rate to prevent V-Sync buffer latency.

03

### Non-Reflex Games (-3 FPS Rule)

- 240Hz Display: Cap at **237 FPS**
- 360Hz Display: Cap at **354 FPS**
- 540Hz Display: Cap at **530 FPS**

If a game lacks native Reflex support, lock maximum frame rate in RTSS or NVCP at exactly -3 FPS to guarantee VRR engagement.

#### Myth Debunked: DisplayPort 1.4 DSC Latency

Many forum myths claim Display Stream Compression (DSC) adds input delay. VESA testing confirms DSC compression/decompression pipeline latency is **less than 0.5 microseconds** (0.0005 ms). It is mathematically imperceptible.

#### Overdrive Calibration Rule (Avoid Coronas)

Never set monitor Overdrive to "Extreme" or "Level 5" on IPS panels. Over-aggressive voltage introduces **inverse ghosting (haloing)** where bright outlines trail dark crosshairs. Stick to "Fast" or "Normal".

Optical Motion Benchmark GtG Response & Panel Overdrive Diagnostic

## Ghosting & Response Time Moving Grid Lab

Track the moving high-contrast grid with your eyes. Identify whether your panel exhibits **normal trailing ghosting** (slow response), **inverse ghosting coronas** (excessive overdrive overshoot), or **flawless motion clarity**.

Display V-Sync: ~144 Hz

Velocity: 720 px/sec

Grid Pattern:

GtG Contrast Shade:

Most sensitive to IPS overdrive overshoot & coronas

Motion Mode:

Dir: left-to-right Cell: 40px

Diagnostic Mode:

Follow a single square smoothly with your eyes as it travels across the screen.

Per-Frame Step: 5.0 px/frame

Frame Time: 6.94 ms

### What Do You See on Your Physical Screen?

Select what your eyes observe as the grid scrolls to receive instant OSD overdrive adjustments.

Interactive OSD Tuning Engine

Bright White Halo / Corona

Glowing bright trail on moving edge

Caused by **voltage overdrive overshoot**. The liquid crystals were over-volted past their target luminance, producing an inverted bright outline.

Dark Smear / Heavy Blur

Smudged dark shadow trailing behind

Caused by **slow pixel response (GtG > refresh frame window)**. Common on VA panels or IPS monitors with Overdrive turned completely off.

Crisp Edges (Zero Halos)

Razor-sharp boundary, no trailing glow

Ideal balance. Overdrive voltage accelerates pixel state change perfectly into the refresh interval without overshoot or smearing.

Interactive Physics Simulation Click-to-Photon Latency Lab

## Input Lag & Refresh Rate Latency Simulator

Witness how display refresh rate (60Hz vs 144Hz vs 240Hz) fundamentally cuts system scanout delay, shrinking aiming error and physical cursor drag during high-speed competitive flicks.

Active Preset: 144 Hz (6.94 ms frame)

60Hz (34ms) 144Hz (15ms) 240Hz (9ms)

Flick Velocity: 900 px/s

400 (Tracking) 1100 (Brisk Crosshair) 1800 (Flick)

Playback Rate: 1.0x (Realtime)

Slow-mo reveals discrete frame stepping

**The Ghost Line** represents your **True Real-Time Mouse Position (0 ms delay)**. Observe how far behind the rendered crosshair lags at 60Hz vs 144Hz vs 240Hz!

True Vector Rendered Hitbox

60 Hz 16.67ms frame time

Lag Offset: ~34.0 ms Displacement: **48 px**

Display updates every 16.7ms (Noticeable stutter and large trailing drift) Severe Aim Error Window

144 Hz 6.94ms frame time

Lag Offset: ~14.8 ms Displacement: **21 px**

Display updates every 6.94ms (56% less lag than 60Hz) Competitive Standard

240 Hz 4.17ms frame time

Lag Offset: ~8.8 ms Displacement: **13 px**

Display updates every 4.17ms (Crosshair feels physically glued to input) Tournament Grade Precision

### The Click-to-Photon Latency Pipeline Breakdown

Measured from physical mouse microswitch click to photon emission at screen center (NVIDIA LDAT baseline).

240Hz is **25.2 ms faster** than 60Hz

60 Hz Panel 34.0 ms

USB Mouse Polling: 1.0 ms

Engine Sim / Frame Gen: 16.7 ms

GPU Render & Queue: 5.5 ms

Display Scanout (Half): 8.33 ms

Pixel GtG Transition: 3.5 ms

⚠️ 34ms delay causes overshooting and phantom hits when flicking against moving opponents.

144 Hz Panel 14.8 ms

USB Mouse Polling: 1.0 ms

Engine Sim / Frame Gen: 6.9 ms

GPU Render & Queue: 2.8 ms

Display Scanout (Half): 3.47 ms

Pixel GtG Transition: 1.6 ms

✓ Cuts latency by 19.2ms (56%). The essential baseline for Counter-Strike 2 and Valorant.

240 Hz Panel 8.8 ms

USB Mouse Polling: 1.0 ms

Engine Sim / Frame Gen: 4.2 ms

GPU Render & Queue: 1.8 ms

Display Scanout (Half): 2.08 ms

Pixel GtG Transition: 0.8 ms

★ Sub-10ms tournament response. Crosshair placement lands with near-zero perceptual delay.

Interactive Calibration Suite Esports Display Accuracy Lab

## Competitive Monitor Calibration Tool

Calibrate your physical monitor's OSD buttons (Brightness, Contrast, Black eQualizer, and Digital Vibrance) to eliminate crushed shadow visibility and highlight clipping in competitive shooters.

Esports Score

0 / 6 Passed

Virtual Simulation Adjustments (Simulate how monitor OSD changes impact visual test patterns)

Simulated Brightness: 0

Simulated Contrast: 0

Simulated Saturation: 100%

Simulated Ringing / Sharpness: 0 / 10

### Near-Black Step Array (Shadow Boost & Black eQualizer Test)

Esports Critical: Target = Box 2 to 4 Barely Distinguishable

If your monitor's **Black eQualizer** or **Brightness** is set too low, dark enemy models (Mirage Palace, Dust2 Tunnels, Haven Garage) crush into pure black. If set too high, the entire screen turns milky grey, ruining dynamic contrast. Look at the 16 patches below against the pitch-black surround.

Pure Reference Black Background (#000000) You should be able to see a clear boundary between Block 3 and Block 0 in a dim room.

0 RGB 0
Reference Black (0) (#000000)

1 RGB 1
Sub-1 (Deep Shadow) (#010101)

2 RGB 2
Near-black limit (#020202)

3 RGB 3
Target visibility (#030303)

4 RGB 4
Clear silhouette (#040404)

6 RGB 6
Dark corner detail (#060606)

8 RGB 8
Esports dark floor (#080808)

10 RGB 10
CS2 Palace depth (#0a0a0a)

12 RGB 12
Shadow texture (#0c0c0c)

16 RGB 16
Tunnel visibility (#101010)

20 RGB 20
Deep midtone (#141414)

24 RGB 24
Clothing folds (#181818)

28 RGB 28
Crate shade (#1c1c1c)

32 RGB 32
Gun barrel shadow (#202020)

40 RGB 40
Recessed doorway (#282828)

48 RGB 48
Mid-shadow baseline (#303030)

Box 0: Pure Black → Box 4: Barely Visible → Box 32: Fully Clear

Ideal Tuning: Box 3 visible; Box 0 remains true black

#### What Are You Seeing?

- • **Boxes 0 through 8 all blend into one black blob:** Your Black eQualizer / Shadow Boost is too low, or Gamma is crushing shadows. Increase Black eQualizer by +2 steps.
- • **Box 0 looks dark grey instead of pitch black:** Your monitor brightness is too high or Black eQualizer is pushed beyond 14. Dial it back until Box 0 turns deep black.

#### Interactive Self-Verification

Box 0 is pitch black (no milky grey backlight glow).

Box 3 and Box 4 are clearly distinguishable from Box 0.

Direct OSD Setup Guide

### Recommended Starting Values By Monitor Brand

ZOWIE (XL2546X / XL2566K / XL2586X)
Esports Tuned Baseline

Black eQualizer 11 - 13 (Default 12)

Brightness 70 - 85

Contrast 50 (Fixed)

Color Vibrance 11 - 13

Gamma Gamma 3 (Standard 2.2)

Sharpness 5 - 7 (Never 10)

**Pro Calibrator Note:** Black eQualizer above 14 washes out dark corners. Keep contrast strictly at 50 to prevent clipping white smoke boundaries.

Curated Competitive Arsenal

## The 2026 Competitive Monitor Tier List

Pro Esports Gold Standard $999

### BenQ ZOWIE XL2586X

24.1 inch • 1920 x 1080 (FHD) • **540Hz**

Panel Technology: Fast TN (DyAc 2)

True GtG / MPRT: 0.5ms / 0.3ms

Backlight Strobe: DyAc 2 (Dual Backlight Strobe)

Optimal Overdrive: AMA: High (Premium setting for DyAc 2 enabled)

The undisputed king of motion clarity in CS2 and Valorant. DyAc 2 with dual-lamp strobing achieves CRT-like motion sharpness where fast weapon spray recoil patterns remain totally readable.

540Hz native refresh rate delivers a 1.85ms frame window

DyAc 2 dual backlight eliminates ghosting with zero double-image crosshair strobe

Industrial shielding hoods prevent glare in LAN tournament environments

Ideal Paired PC Blueprint:
[Project 9800X3D: The 540Hz / 4K Titan](https://fpschaser.com/how-to-increase-fps-i9-9900k/)

World First 480Hz OLED $999

### ASUS ROG Swift OLED PG27AQDP

26.5 inch • 2560 x 1440 (QHD) • **480Hz**

Panel Technology: WOLED

True GtG / MPRT: 0.03ms / 0.5ms

Backlight Strobe: None (Native 480Hz Instant Pixel Transitions)

Optimal Overdrive: Native (No Overdrive required on OLED)

Combines the insane 480Hz refresh rate with instantaneous 0.03ms OLED pixel transitions. Eliminates all liquid crystal transition lag without requiring backlight strobing.

480Hz QHD 1440p resolution provides crisp target outlines at distance

0.03ms true GtG eliminates all pixel transition blur and coronas

True deep blacks with infinite contrast make dark corners in CS2 easy to spot

Ideal Paired PC Blueprint:
[Project 9800X3D: The 540Hz / 4K Titan](https://fpschaser.com/how-to-increase-fps-i9-9900k/)

360Hz 1440p & ULMB 2 King $749

### ASUS ROG Swift 360Hz PG27AQN

27.0 inch • 2560 x 1440 (QHD) • **360Hz**

Panel Technology: Fast IPS

True GtG / MPRT: 1ms / 0.5ms

Backlight Strobe: NVIDIA ULMB 2 (1000Hz Effective Motion Clarity)

Optimal Overdrive: Variable OD: Normal / ULMB 2 Pulse Width 60%

The ideal bridge between 1440p resolution and esports speed. Features an Ultrafast IPS panel with dual-driver voltage boost and official NVIDIA ULMB 2 support, producing over 1,000Hz of effective motion clarity.

Native NVIDIA G-Sync hardware module for zero-stutter VRR

Official ULMB 2 backlight strobing provides exceptional motion clarity at full 360Hz

Built-in NVIDIA Reflex Latency Analyzer measures mouse-to-display delay

Ideal Paired PC Blueprint:
[Project 7800X3D: The Esports Latency King](https://fpschaser.com/how-to-increase-fps-i9-9900k/)

Best Value 1440p OLED $649

### LG UltraGear 27GS95QE-B

26.5 inch • 2560 x 1440 (QHD) • **240Hz**

Panel Technology: WOLED

True GtG / MPRT: 0.03ms / 0.8ms

Backlight Strobe: None (Instantaneous WOLED)

Optimal Overdrive: Factory Native (No Overdrive needed)

The sweet spot for competitive gamers who also love story-driven AAA games. 240Hz OLED provides lower total input delay than a 360Hz IPS panel due to near-zero pixel rise/fall time.

Upgraded 275 nits 100% window brightness over predecessor

Full-bandwidth HDMI 2.1 ports support 240Hz without chroma subsampling

Anti-glare low reflection (AGLR) matte coating eliminates lamp reflections

Ideal Paired PC Blueprint:
[Project 7800X3D: The Esports Latency King](https://fpschaser.com/how-to-increase-fps-i9-9900k/)

Under $250 Value Champion $249

### ASUS TUF Gaming VG259QM

24.5 inch • 1920 x 1080 (FHD) • **280Hz**

Panel Technology: Fast IPS

True GtG / MPRT: 1ms / 1ms

Backlight Strobe: ELMB Sync (Simultaneous VRR + Backlight Strobe)

Optimal Overdrive: Trace Free: 60 (or ELMB Sync Enabled)

The best budget esports monitor on the market. Hits 280Hz overclocked with ASUS ELMB Sync, enabling backlight strobing and variable refresh rate at the exact same time.

Sub-$250 price tag with true 280Hz refresh rate

ELMB Sync prevents screen tearing while simultaneously strobing for motion clarity

Vibrant IPS colors and wide viewing angles

Ideal Paired PC Blueprint:
[Project 7600X: The Pure FPS Slayer](https://fpschaser.com/how-to-increase-fps-i9-9900k/)

Blur Busters PureXP Certified $269.99

### ViewSonic OMNI XG2431

23.8 inch • 1920 x 1080 (FHD) • **240Hz**

Panel Technology: Fast IPS

True GtG / MPRT: 0.5ms / 0.5ms

Backlight Strobe: Blur Busters Approved PureXP

Optimal Overdrive: Response Time OD: Advanced / PureXP: Light or Normal

Co-developed with Mark Rejhon from Blur Busters. Features factory-calibrated PureXP strobe tuning that rivals DyAc+ while using a vibrant Fast IPS panel. Built-in mouse cable bungees keep desk clutter-free.

Official Blur Busters Approved certification with custom strobe utility software

Near-zero strobe crosstalk in the center screen aiming crosshair zone

Integrated dual mouse bungees underneath display bezel

Ideal Paired PC Blueprint:
[Project 9900K: The 14nm Sleeper](https://fpschaser.com/how-to-increase-fps-i9-9900k/)

Ultimate 4K 240Hz Display $1,299

### ASUS ROG Swift OLED PG32UCDM

31.5 inch • 3840 x 2160 (4K UHD) • **240Hz**

Panel Technology: QD-OLED

True GtG / MPRT: 0.03ms / 0.8ms

Backlight Strobe: None (Native 240Hz QD-OLED)

Optimal Overdrive: Factory Native (No Overdrive required on QD-OLED)

The ultimate display for gamers who want pristine 4K fidelity and esports-grade 240Hz frame delivery. 3rd-generation QD-OLED pixel structure fixes text fringing while delivering 1000-nit HDR highlights.

3840x2160 native resolution with 140 PPI pixel density

3rd-gen QD-OLED subpixel matrix delivers razor-sharp typography and HUD elements

90W USB-C PD and integrated KVM for multi-device switching

Ideal Paired PC Blueprint:
[Project 9800X3D: The 540Hz / 4K Titan](https://fpschaser.com/how-to-increase-fps-i9-9900k/)

Full Hardware Synergy Matrix

## Pairing The Right Monitor With The Right Rig

Mismatching your monitor and graphics setup leads to wasted money. Pairing a 540Hz monitor with a mid-tier CPU results in stuttery duplicate frames, while pairing an RTX 4090 with a 144Hz panel leaves the GPU running at 30% utilization.

| PC Build Tier | Recommended Display Spec | Flagship Monitor Pick | CS2 / Valorant FPS Expectation | Action |
| --- | --- | --- | --- | --- |
| Affordable: Project 7600X ($1,089) | 1080p 240Hz - 280Hz Fast IPS | ASUS VG259QM / AOC 24G2SP | 410 FPS Avg (100% Saturation) | [View Rig](https://fpschaser.com/how-to-increase-fps-i9-9900k/) |
| Mid-Range: Project 7800X3D ($1,940) | 1440p 240Hz-360Hz Fast IPS or OLED | ASUS PG27AQN / LG 27GS95QE | 540 FPS Avg (Zero Stutter Flatline) | [View Rig](https://fpschaser.com/how-to-increase-fps-i9-9900k/) |
| High-End: Project 9800X3D ($3,550) | 540Hz Fast TN or 4K 240Hz QD-OLED | BenQ ZOWIE XL2586X / PG32UCDM | 650+ FPS Avg (540Hz Saturation) | [View Rig](https://fpschaser.com/how-to-increase-fps-i9-9900k/) |
| Sleeper Retro: Project 9900K ($850) | 1080p 240Hz Strobe Blur Busters | ViewSonic XG2431 PureXP / XL2546K | 340 FPS Avg (Ultra-Low Ring Bus) | [View Rig](https://fpschaser.com/how-to-increase-fps-i9-9900k/) |

Display Engineering & Clarity

## Gaming Monitor & Motion Clarity FAQs

Display engineering facts: Backlight strobing (DyAc 2 / ULMB 2), GtG vs MPRT, G-Sync -3 FPS cap rules, and OLED vs Fast TN.

Ctrl+F

A pervasive gaming myth claims that strobed backlights add input lag. In truth, modern implementations like BenQ DyAc 2 and NVIDIA ULMB 2 flash the backlight precisely during the optical dwell phase when liquid crystals have already completed their transition.

Because the monitor does not delay or buffer incoming display frames, input latency is identical to non-strobed mode.

The human benefit is dramatic: motion persistence (MPRT) drops from 4.16ms (at 240Hz sample-and-hold) down to sub-0.5ms CRT-like clarity, completely eliminating retinal tracking blur during rapid crosshair movement.

Key Takeaway:
DyAc 2 and ULMB 2 provide CRT-level optical tracking clarity with zero added frame input delay.

[UFO Refresh Rate Verification & Motion Simulator](https://fpschaser.com/gaming-monitor-motion-clarity-guide/#refresh-rate-verification)

Need more details on this optimization layer? [Master Zero-Latency Checklist](https://fpschaser.com/fps-optimization-checklist/)
