# Monitor Ghosting Test, GtG Pixel Response & Overdrive Lab | FPS Chaser

Canonical: https://fpschaser.com/ghosting-test/

> Test display ghosting, pixel response time (GtG), and tune overdrive/TraceFree levels to eliminate trailing blur and inverse overshoot halos.

## Monitor Ghosting, Pixel Response Time & Overdrive Lab

Detect trailing motion blur, tune overdrive levels, and eliminate inverse overshoot halos across IPS, OLED, and VA displays.

Understanding Ghosting vs Inverse Overshoot
**Ghosting (Trailing Blur):** Occurs when pixel transitions (GtG) are too slow to keep up with the monitor refresh rate.
**Inverse Ghosting (Coronas / Halos):** Occurs when monitor Overdrive / TraceFree is set too aggressively ("Extreme" or "Fastest"), causing pixel voltage to overshoot the target color.

[Launch Hz Test →](https://fpschaser.com/refresh-rate-test/)

Optical Motion Benchmark GtG Response & Panel Overdrive Diagnostic

## Ghosting & Response Time Moving Grid Lab

Track the moving high-contrast grid with your eyes. Identify whether your panel exhibits **normal trailing ghosting** (slow response), **inverse ghosting coronas** (excessive overdrive overshoot), or **flawless motion clarity**.

Display V-Sync: ~144 Hz

Velocity: 720 px/sec

Grid Pattern:

GtG Contrast Shade:

Most sensitive to IPS overdrive overshoot & coronas

Motion Mode:

Dir: left-to-right Cell: 40px

Diagnostic Mode:

Follow a single square smoothly with your eyes as it travels across the screen.

Per-Frame Step: 5.0 px/frame

Frame Time: 6.94 ms

### What Do You See on Your Physical Screen?

Select what your eyes observe as the grid scrolls to receive instant OSD overdrive adjustments.

Interactive OSD Tuning Engine

Bright White Halo / Corona

Glowing bright trail on moving edge

Caused by **voltage overdrive overshoot**. The liquid crystals were over-volted past their target luminance, producing an inverted bright outline.

Dark Smear / Heavy Blur

Smudged dark shadow trailing behind

Caused by **slow pixel response (GtG > refresh frame window)**. Common on VA panels or IPS monitors with Overdrive turned completely off.

Crisp Edges (Zero Halos)

Razor-sharp boundary, no trailing glow

Ideal balance. Overdrive voltage accelerates pixel state change perfectly into the refresh interval without overshoot or smearing.

Core Knowledge Base

## Common Performance FAQs

Hard-won engineering truths regarding frametime pacing, input latency, sub-timing latency, and competitive OS tuning.

Ctrl+F

Standard in-game FPS counters only sample the mathematical average across thousands of frames over a full second. They do not tell you when individual frames take significantly longer to render.

If your monitor refreshes every 4.16ms (at 240Hz), but a cache-miss, background Windows service, or shader compilation causes a single frame to stall for 18ms, your eye perceives a distinct micro-stutter. The FPS counter might still show "235 FPS", but your 1% and 0.1% lows plummeted to 55 FPS.

To fix this: optimize memory sub-timings to eliminate memory-bus stalls, cap framerates to keep GPU utilization under 97%, and eliminate background DPC latency spikes using LatencyMon.

Key Takeaway:
Focus on 1% Lows and frametime consistency rather than peak average FPS for butter-smooth tracking.

[Open Frame Time & Micro-Stutter Calculator](https://fpschaser.com/#calculator)

Need more details on this optimization layer? [Master Zero-Latency Checklist](https://fpschaser.com/fps-optimization-checklist/)
