# PTM7950 & CPU Thermal Throttling Simulator | FPS Chaser

Canonical: https://fpschaser.com/thermal-simulator/

> Simulate thermal throttling curves, pump-out degradation over time, and compare Honeywell PTM7950 phase change pads against traditional thermal paste.

## Thermal Throttling & PTM7950 Phase-Change Simulator

Compare standard silicone thermal paste pump-out versus Honeywell PTM7950 phase-change pad thermal resistance under sustained gaming loads.

Dynamic Thermals Lab

## Live Thermal Monitoring & Heat Management

Simulate real-time CPU & GPU junction temperatures, evaluate dynamic cooling configurations, and observe the **90°C Critical Threshold Alert** visual warning pulse.

Active Workload:

High single-thread draw with frame-dispatch burst spikes.

Cooler Setup:

Dual 140mm high-static fans with large liquid thermal buffer; optimal for 9900K 5.0GHz.

Thermal Compound:

Zero pump-out phase-change pad.

Fan Profile: 1200 RPM

Ambient Room Temp:
22°C

Safety Threshold Spectrum: NOMINAL SAFETY (+24.0°C HEADROOM TO 90°C)

Critical Threshold Trigger: **> 90.0°C**

20°C (Ambient) Nominal (<80°C) Elevated (80–89°C) Critical Alert (>90°C) 105°C (TJMax)

CPU Package (°C)

GPU Core (°C)

AIO Coolant (°C)

SUB-90°C NORMAL • STREAMING 1Hz

CPU Package Junction OPTIMAL

64°C

Headroom to 90°C Alert: **26.0°C Safe**

GPU Core Junction COOL

66°C

Estimated Hotspot: **78.0°C**

AIO Fluid Loop DELTA +11.0°C

33°C

Pump Speed: **2850 RPM (100% Locked)**

### Chaser Heat-Management Knowledgebase

Tactical Cooling Protocols

Phase-Change Polymer (PTM7950) vs Silicon Pump-Out

Standard paste like Kryonaut or MX-6 is designed for flat heatspreaders. Under prolonged thermal expansion and contraction cycles, microscopic flexing squeezes paste away from the center die hotspot (the **"pump-out effect"**).

- **Honeywell PTM7950:** Solid at room temp (peels like a pad). When temperature exceeds 45°C, it transitions into liquid phase, achieving an ultra-thin 0.02mm bondline without spilling over.
- **Longevity:** PTM7950 does not dry or degrade for 3+ years in server environments. Ideal for direct-die delidding or high-wattage 9900K 5.0GHz runs.
- **Application Tip:** Store the pad in a freezer for 10 minutes prior to peeling the clear plastic film to prevent tearing.

Core Knowledge Base

## Common Performance FAQs

Hard-won engineering truths regarding frametime pacing, input latency, sub-timing latency, and competitive OS tuning.

Ctrl+F

Standard in-game FPS counters only sample the mathematical average across thousands of frames over a full second. They do not tell you when individual frames take significantly longer to render.

If your monitor refreshes every 4.16ms (at 240Hz), but a cache-miss, background Windows service, or shader compilation causes a single frame to stall for 18ms, your eye perceives a distinct micro-stutter. The FPS counter might still show "235 FPS", but your 1% and 0.1% lows plummeted to 55 FPS.

To fix this: optimize memory sub-timings to eliminate memory-bus stalls, cap framerates to keep GPU utilization under 97%, and eliminate background DPC latency spikes using LatencyMon.

Key Takeaway:
Focus on 1% Lows and frametime consistency rather than peak average FPS for butter-smooth tracking.

[Open Frame Time & Micro-Stutter Calculator](https://fpschaser.com/#calculator)

Need more details on this optimization layer? [Master Zero-Latency Checklist](https://fpschaser.com/fps-optimization-checklist/)
